bolting wooden post to block floor

  • Set the wooden post in place on the wooden floor. Drill pilot holes through the lag bolt or screw holes on the sides of the anchor. Install the lag bolts to secure the post to the floor.


  • Anchoring handrails - or securing any object to concrete or masonry using threaded rods, rebar, bolts or dowels - requires a high strength, permanent bond, especially applications that will be subjected to heavy loads or vibration. Depending upon your specific anchoring application, QUIKRETE manufactures an Anchoring ...


  • Place the wooden plank on top of the I-beam flange. Turn in 1/4-inch by 1 1/2-inch lag bolts with a ratchet and socket until they are firm. This now gives you a solid base to mount such things as floor joist hangers, plywood or other wood stock that can be directly screwed into the top mounted plank.


  • If your ledger is attached with just nails or decking screws, install half-inch-diameter lag screws or carriage bolts, spaced 16 to 24 inches apart. If the ledger is badly ... Most elevated decks have vertical wood posts that rest on top of concrete piers or extend down into concrete-filled holes. Either way, inspect ...


  • Tim Carter, of AsktheBuilder.com, demonstrates a really simple way to nail wood to a concrete floor. ... thanks for this! i want to attach chunky wooden battens to a solid ceiling (i'm in a block of flats) so i can attach things to it easily, eg curtains, hanging storage etc. your method looks a bit awkward for a ...


  • The mounting instructions call for screwing or bolting the shelves to a concrete floor and wall, but they don't say how. ... for example, a ¼-inch Titen HD Mini requires only 15 foot-pounds of torque to be tightened when driven into concrete, and 10 foot-pounds when driven into hollow concrete block.


  • This method is only effective when you are attaching wood to concrete blocks or a concrete black wall. ... Yet another way to attach wood to concrete is by using concrete anchor bolts. Step 1 Predrill Holes. Pre-drill a hole into the wood and concrete that is large enough in diameter for the anchor bolt to fit into. You want the ...


  • There are several methods for securing a timber post to a solid poured concrete pier, slab or foundation. With a welded steel knife plate to timber post, a flat piece of plate steel with rebar fingers is embedded in to the concrete. Then the elevated post base is attached to the timber post through a […] Continue Reading.


  • These anchors are available in several sizes and will hold up to 200 lbs. The sleeves pinch the sides of the predrilled hole and get tighter as you tighten the screw or bolt. Best uses: Concrete, concrete block, mortar and brick. How to use: First, drill the proper size pilot hole (3/8-in., 1/2-in., etc.) through the wood or metal and ...


  • I guess if the box newels are hollow, I would take a solid block of wood that fits tightly inside the box at least 4 inches up and screw the heck out of it to whatever I could find under the floor. Then fasten the box newel to the block - assuming you could screw that block to the top cords of the truss. If you only hit ...


  • Masonry drill bits will also plow through wood, so don't be afraid to drill right through the wood and into the wall or slab. That makes it a lot easier to get the ... When you're fastening posts, poles, large bolts or rebar to concrete, drill an oversize hole and fill it with hydraulic cement. Hydraulic cement creates an extremely ...


  • DynaBolts (that's the name for this particular anchor in Australia. They are know by other names in other countries) are the ideal anchor for attaching almost anything to solid masonry such as concrete. This video will look at attaching timber to a concrete floor. The Tools You'll Need Are: Hearing protection,


  • Simply, place the tip of the spike over the point in the ground where you want your post position to be and, using a wooden bung or piece of off-cut timber to protect ... You should use a 6mm masonry drill bit to pre-drill the four fixing holes then position the post support over the holes and insert the bolts through the fixture and ...


  • Also known as wedge anchors, stud anchors are one piece expansion bolts with universal style collars for heavy duty fastening into stone or solid concrete. Stud anchors ... A heavy duty anchor for use in brick, stone, concrete, or block. ... This anchor is made of lead and can be used with wood screws or sheet metal screws.


  • Used in conjunction with lag bolts; Short shields work well on shallow surfaces; Long shields provide greater strength. Lead screw anchors. Best for securing light to medium loads in brick, concrete block and masonry. Plastic wall plugs. Best for light-duty applications in masonry, such as towel bars, tool brackets and shower ...


  • Try to avoid bolting your safe to wooden floors, unless fixing into the joist. However in this case you would need to purchase alternative heavy duty wood screws. Floor boards are not strong or thick enough to secure a safe and can make theft of your safe that little bit easier. If you don't have an alternative flooring than a floor ...


  • However, any method used to space the gun safe off of a concrete floor is more secure if you can block the exposed gap under the gun safe. ... Post Tensioned Concrete Slab Warning .... When bolting a gun safe down into a wood framed floor, it is best to bolt the safe down directly into the floor joists.


  • Understanding the common structural shortcomings that cause floors to sag and what to do about them. ... Be suspicious of wood posts set on dirt floors or wood posts with concrete poured around the post bases. As the posts ... A better option is sistering, where identical lumber is bolted to the member.


  • Let the experts at DIYNetwork.com show you how to place arbor posts on an existing patio. ... The brackets are anchored to the stone and concrete floor using screws and bolts with wedge anchors. Once the positions ... This plate will anchor the post and will hold it slightly above the patio to help prevent wood rot. Check for ...


  • Floors sag because the posts supporting a house beam are failing and/or the footings holding those posts are undersized and sinking. Diagnose the ... were undersized. Besides pouring new footings and restoring the posts, we added plinth blocks (Photo 12) to elevate the wood above moisture on the basement floor.


  • Drilling pilot holes in wood before inserting nails or wood screws, drilling a hole for a bolt, and pinning boards together with wooden dowels are some examples of the importance of using a drill in ... Wear safety glasses, closed-toe shoes, and snugly-fitting clothing to prevent your sleeves from getting caught up in your work.


  • The solution: A beam should be bolted to the side of a post only for low-level decks that have short-spanning joists and beams and many support posts. ... The bolt may not shear, but the wood can shred. Use a .... Fastening guardrails to deck rim joists or floor joists with wood screws is not acceptable.


  • For that, I want a wood bridge between the beam and the post. Beam rotation isn't a problem with every ... Fastened to the post with structural screws or through-bolts, splice blocks typically run from the top of the beam and overlap the post-beam joint by a foot or two. When posts are shorter than 5 feet, I use ...


  • Simpson Strong-Tie category "Post Bases" ... Post bases that install on hardened concrete and provide a 1" standoff at the bottom of the post to help prevent moisture rot. ... The updated HBC post base is a post-installed saddle for connecting posts to wood in applications such as patio covers, deck trellises and pergolas.