how to solve outside lumber decks problems

  • Adding ventilation will help solve the problem if your deck was simply built too close to the ground, as it will allow for trapped moisture to escape. ... Wood Decks. If you've got a wood deck with mold and deck mildew problems, the most likely cause is neglect. Chances are that you (or the person you bought the house from) ...


  • However, if you notice any serious structural problems, cordon off the deck and call a licensed engineer to evaluate the situation and offer a solution. 1. Loose Ledger ... Most elevated decks have vertical wood posts that rest on top of concrete piers or extend down into concrete-filled holes. Either way ...


  • Also, if your deck was built before 2004, it's probably made of lumber treated with chromated copper arsenate. Regular ... Before staining, pressure-wash or brush the old surface with a cleaning solution. If there's any remaining mold and mildew, remove it using a solution of 1 part bleach and 3 parts water.


  • Working from the top down splatters the cleaning solution onto dry wood where it can double-bleach the surface, leaving marks that don't go away when the lower area is washed. Working from the bottom up means you'll be splattering onto a wet surface where the cleaner is diluted, leaving no marks. Composite deck: ...


  • A partial solution is to use lumber that's less palatable to fungi: pressure-treated wood or rot-resistant species like cedar, redwood, or ipe. ... The problem is that rot can invade the deck board or the bottom of the siding when organic matter builds up in the space between the deck and the side of the house ...


  • Barbara and Phil Johnson, of Mobile, Alabama, faced the same problems other deck owners do. Over the ... A project like this can be done in two days, but it's best to spread the work over two weekends to ensure the wood is completely dry before you apply stain. .... 1 qt. sodium hypochlorite solution (household bleach)


  • Painting your wood deck can be a great choice. Paint has quite a few benefits over the other finish options such as stain or sealer, but it may not be for you if you want a natural looking wood deck. Here are the pros and cons of painting your outside deck: Painting allows you to use any color you want.


  • While it is true that these hardwood decking and siding species have some remarkable physical properties, they are still natural wood products and must be treated as ... The best solution to eliminate or at least minimize these problems is to design and build the deck with proper drainage and ventilation.


  • If you used a penetrating oil stain, you may have allowed the stain to build up too thick a coat on the surface of the wood. Penetrating wood stains are not intended to be a surface finish. If applied too thickly, they won't dry properly and will remain tacky to the touch. This can also happen if the wood wasn't stripped and ...


  • From cookouts to relaxing in the evenings, a deck is a great way to enjoy the outdoors without having to leave your house. But at some point it's going to require maintenance to keep it looking pristine and structurally sound. Let's take a look at how you can deal with the 8 most common issues that could crop up over the ...


  • We have just had our deck finished with gravel path for the outside of the deck called picture frame, and saddle for the spine and middle of deck. .... reason and ask to see the report they based their decision on- in our case we were able to stay on top of the details and work towards an acceptable solution.


  • There are a number of ways to prevent this and fix your problem - and make your deck last longer. From what you are describing there ... This means using two screws on each end, and using two screws towards the outside of the boards at every joist along the way. Doing this will help keep the boards ...


  • Deck boards will sometimes have problems that you need to address before the whole deck is compromised and in need of more ... Rotten wood -- If the wood is rotten to the point that it needs to be replaced, expect to pay between $500 and $1,000, depending on the type of wood ...


  • Over time, foot traffic and the pressure from tables, chairs and grills can damage your deck, causing wood to split and crack. In addition, decking around these items may become discolored, while boards underneath retain their original color. Power washing your deck is one way to solve this problem, but be ...


  • Because of the minimal amount of wood involved the best plug on the deck might only be 3mm deep. Likewise, the caulking, unless of adequate depth and width, will not remain glued as the wood moves. However, all these problems would amount to little if folk took care of their teak decks. The most ...


  • Pressure-treated lumber can support more weight and span longer distances than cedar, redwood or other woods commonly used for building decks. It's also much ... Your decking boards will be tagged with the concentration and treating solution used. Use .40 ... Tip 6: Every type of deck board has its pros and cons. How to ...


  • The words 'No Problem' echo in your mind and you're left with a damaged deck and a bruised ego. Of all the questions I receive about cleaning a deck the most often asked question is “HOW?” So, this is going to begin a series of articles on how to clean you deck. Whether you deck is wood or composite, periodic cleaning ...


  • dia. machine bolt, but long before that occurs, the wood around the bolt would be crushed and distorted, resulting in a failed connection. The solution: A beam should be bolted to the side of a post only for low-level decks that have short-spanning joists and beams and many support posts. Of course, that ...


  • Learn how to repair a deck with the experts at DIY Network. ... To avoid becoming a statistic, give your deck an annual inspection and make repairs so small problems don't become expensive — or even dangerous — big problems. In the spring when weather ... Bigger areas of rot may require the wood member be replaced.


  • Jul 11, 1982 ... ALTHOUGH a wood deck or porch made of pressure-treated lumber will probably last almost a lifetime without further treatment, few homeowners (or builders) actually use this type of lumber in residential construction. This is either because of ... What can you suggest to solve this problem? - B.H.J., West ...


  • Wood dries from the outside in. When it feels dry on the outside, it's probably still wet on the inside. You do not want the penetrating oil to trap moisture inside the decking. After moderate rain, wait at least two days; three days is better. The manufacturers advise “3 to 5 days minimum.” You want the moisture ...


  • Bamboo that comes in consistent 6' lengths and with grooves on the ends of boards means its very easy to manoeuvre on the job site. You can quickly lay down boards and just keep installing them end to end because the wood is so strong the ends can match between joists. You waste far less material. You spend less ...


  • Virtually all problems with wood-based building materials are moisture problems. Peeling paint .... nicer for years. These recommendations are good for all wood decks, but pressure treated southern pine seems particularly sensitive. ... The solution is: keep wood dry or poison it with a chemical treatment.


  • A great overview of the pros and cons of cedar decking vs. pressure treated lumber or composites. ... Attractive. Cedar is generally a more attractive wood solution, with strong color tones and consistency that can be sanded, stained, and treated for a beautiful finish.